GWSGrand Welding
Solutions LLC

Articles

Welding machines and the industries they serve in the UAE

Stick, TIG, MIG/MAG and submerged arc – which process fits which job, and why the choice of machine matters.

GWS Technical Team2026-11-133 min read

Welding is the backbone of almost every project you can see in the UAE skyline – from steel frames and pipe racks to food-grade stainless tanks and ship hulls. Yet "a welding machine" can mean very different equipment. Choosing the right process and power source decides how fast you weld, how often you repair, and whether the joint passes inspection.

The four main arc-welding processes

ProcessCommon nameFillerTypical use
SMAWStick / MMACoated electrodes (E6013, E7018, E308L …)Site work, structural steel, maintenance, pipelines
GTAWTIG / ArgonSeparate filler rod (ER70S-6, ER308L …)Stainless and thin sheet, root passes on pipe, high-purity work
GMAW / FCAWMIG/MAG, flux-coredWire on a spoolWorkshop fabrication, high-deposition production
SAWSubmerged arcWire + granular fluxBeams, tanks, pressure vessels, spiral pipe

Stick (MMA)

Stick welding needs only a power source, an electrode holder and an earth clamp, so it is the first choice on site and in windy conditions. Modern IGBT inverters such as the APS Discover and Genesis series are light, run from generators and keep the arc stable with long cables. Heavy-duty models like the Genesis 400HD are built for continuous duty on structural steel, while the Genesis Star 400 is tuned for cellulosic pipeline electrodes.

TIG

TIG gives the cleanest, most controlled weld. It is used for stainless steel in food, pharmaceutical and water plants, for aluminium (with an AC/DC machine such as the APS Storm), and for root passes on pressure piping. Pulse TIG machines – for example the Genesis HD Pulse and Apollo ranges – control heat input on thin wall and reduce distortion.

MIG/MAG and flux-cored

Wire processes deposit metal several times faster than stick welding, so they dominate workshop fabrication. A multiprocess CC/CV inverter such as the Magnus or Lumina range runs solid wire, flux-cored wire and stick electrodes from one power source. Flux-cored wire adds high deposition and good out-of-position performance for structural and marine work.

Submerged arc (SAW)

For long, thick seams nothing beats submerged arc. The arc runs under a blanket of flux, deposition is very high and the weld quality is consistent. SAW power sources like the Endeavour 1250 usually work with a tractor, a column and boom or a beam gantry.

Which industries use what

  • Construction and structural steel – stick and flux-cored welding on site, MIG/MAG in the fabrication shop, SAW for built-up beams.
  • Oil, gas and petrochemical – TIG root passes, stick or flux-cored fill and cap on pipe; strict procedure qualification (WPS/PQR).
  • Marine and shipbuilding – flux-cored welding in all positions, multi-operator machines for hull blocks, carbon arc gouging for back-gouging.
  • Food, beverage and pharmaceutical – stainless TIG with clean, passivated welds (electrolytic cleaners such as TIG Brite remove heat tint).
  • Water, power and district cooling – pipe welding, tanks and pressure vessels with TIG, stick and SAW.
  • General fabrication and maintenance – compact inverters, multiprocess machines and good accessories.

How to choose the machine

  1. Material and thickness – stainless and aluminium point to TIG (AC for aluminium); thick carbon steel to MIG/MAG, flux-cored or SAW.
  2. Where you weld – site work needs generator-friendly, wide-voltage inverters; production lines need high duty cycle.
  3. Duty cycle, not peak amps – check the current at 60 % and 100 % duty. A 400 A machine that gives 310 A at 100 % will keep working all shift.
  4. Process flexibility – a CC/CV multiprocess machine covers more jobs with one investment.
  5. Service and spare parts – a machine is only as good as the support behind it.

How GWS helps

Grand Welding Solutions is the Authorized Sales & Service Dealer of APS Welding in the GCC and supplies Telwin, Promotech automation and a full range of consumables. We demonstrate machines, install and commission them, train your welders and repair them in our Sharjah workshop. Browse the welding machines in our online shop or request a quote.

Stay ahead on stock and new arrivals

Get an e-mail when new items are added to our stock or items come back in stock. Choose brands and categories in the online shop.

We send a confirmation e-mail first. Unsubscribe with one click at any time.