A CNC (computer numerical control) cutting machine moves a plasma or oxy-fuel torch along a path generated from a drawing. Compared with hand cutting, it gives repeatable parts, square edges, less grinding and far less wasted plate.
The main parts of a CNC cutting system
- Mechanics – rails, gantry and drives. Rigidity and good rails decide accuracy over the years.
- Controller – for example the Fangling F2000 series – reads the cutting program and drives the axes.
- Torch-height control (THC) – keeps the plasma torch at the right height over warped plate; essential for consistent quality.
- Cutting source – a plasma power source, oxy-fuel torches, or both.
- Nesting software – arranges parts on the plate to minimise waste.
Types of CNC cutting machines
| Type | Strengths | Best for |
|---|---|---|
| Portable CNC (e.g. Honeybee Minbee) | Low cost, easy to move, sets up on the plate | Site work, small shops, occasional shapes |
| Heavy-duty portable | Stiffer, longer cuts, plasma and flame | Medium plate, workshops without crane access |
| Table-type CNC plasma | Integrated table with fume extraction | Clean workshop cutting of sheet and plate |
| Gantry CNC | Large plates, multiple torches, bevel heads | Production cutting, thick plate |
What makes a reliable installation
- Matching the plasma source to the thickest regular plate and the duty cycle.
- Good earthing and clean power – plasma and CNC electronics need proper grounding.
- Dry compressed air with filters and a dryer for plasma.
- Operator training in nesting, kerf compensation and consumable care.
- Local service for controllers, THC and drives.
GWS supplies Honeybee CNC portable and table machines and APS CNC gantries, wires and commissions Fangling controllers and wireless remotes, and supports FastCAM, StarCAM and CypCut software.