GWSGrand Welding
Solutions LLC

Articles

Oxy-fuel flame cutting: still the king of thick steel

Torches, nozzles, gases and portable or CNC flame cutting machines.

GWS Technical Team2026-11-112 min read

Oxy-fuel (flame) cutting burns through carbon steel with a jet of pure oxygen after the metal is preheated to its ignition temperature. It needs no electricity at the torch, cuts steel well over 100 mm thick, and the equipment is simple and robust.

When flame cutting is the right choice

  • Thick carbon and low-alloy steel – from about 20 mm upwards oxy-fuel is usually cheaper per metre than plasma.
  • Site work and demolition – a hand torch and two cylinders go anywhere.
  • Bevelling weld edges on plate and pipe with a carriage or a pipe cutting machine.

It does not cut stainless steel or aluminium – their oxides melt at higher temperatures than the metal. For those, use plasma or laser.

Gases

Fuel gasFlame temperatureNotes
AcetylenehighestFast pierce and preheat, best for hand cutting and thin to medium plate
Propane / LPGlowerEconomical for thick plate and machine cutting; needs suitable nozzles

Torches, nozzles and safety equipment

A cutting outfit consists of regulators, twin hose, flashback arrestors, the torch and nozzles. Nozzle series such as 101, GPN, ANME and PNME must match the torch and fuel gas. Flashback arrestors on the regulators and torch are essential: they stop a flame travelling back into the hose and cylinder. GWS supplies Victor torches and nozzles, Harris outfits, Uniweld flashback arrestors, twin hose and lighters.

Automating flame cutting

  • A portable gas cutting carriage runs on a track for straight cuts and bevels – far straighter and faster than hand cutting.
  • Pipe profile machines cut saddles and bevels on pipe ends.
  • CNC gantries and portable CNC cutters (for example Honeybee machines with oxy-fuel and plasma torches) cut shapes from nesting software.

Good practice

  1. Use the nozzle size for the plate thickness and keep it clean.
  2. Set oxygen and fuel pressures to the nozzle chart.
  3. Keep the correct stand-off and travel speed – the drag lines should be nearly vertical.
  4. Check hoses and arrestors regularly and store cylinders upright and secured.

Stay ahead on stock and new arrivals

Get an e-mail when new items are added to our stock or items come back in stock. Choose brands and categories in the online shop.

We send a confirmation e-mail first. Unsubscribe with one click at any time.